九九大香蕉,体内射精视频,亚洲精品夜夜爽,少妇自慰喷水网站www

    您好,歡迎進入上海力敏實業有限公司網站!
    一鍵分享網站到:
    您現在的位置:首頁 >> 產品中心 >> >> PALL過濾膜過濾器 >> 7212Fiberfilm 過濾膜pall(頗爾)7212汽車尾氣檢測濾膜

    Fiberfilm 過濾膜pall(頗爾)7212汽車尾氣檢測濾膜

    • 更新時間:  2023-07-25
    • 產品型號:  7212
    • 簡單描述
    • 直徑:47mm;包裝:50PK;過濾介質:帶有碳氟涂層的硼硅玻璃纖維;厚度:203um;重量:3.4 mg/cm2;空氣流速:180 L/min/cm2;Z高操作溫度:315.5攝氏度
    詳細介紹

    Fiberfilm過濾膜7212汽車尾氣檢測濾膜,Pallflex過濾膜7212價格

    Fiberfilm™ Filters

    • Economical filter suited for a range of air sampling applications. 
    • Moisture variations in air or gases during air sampling will not cause chemical reactions on the filter.
    • Heat-treated (HT) version available for reduction of trace organics.

    Fiberfilm 過濾膜

    貨號

    說明

    包裝

    7210

    T60A20, 25 mm

    100/pkg

    7211

    T60A20, 37 mm

    50/pkg

    7212

    T60A20, 47 mm

    50/pkg

    7216

    T60A20, 55 mm

    50/pkg

    7213

    T60A20, 70 mm

    50/pkg

    7209

    T60A20-HT, 70 mm

    50/pkg

    7214

    T60A20, 90 mm

    50/pkg

    7257

    T60A20, 100 mm

    50/pkg

    7215

    T60A20, 8 x 10 in.

    50/pkg

     

     

    DescriptionTissuquartz FiltersEmfab Filters*Fiberfilm Filters
    Filter MediaPure quartz, no binderBorosilicate glass microfibers reinforced with woven glass cloth and bonded with PTFEHeat resistant borosilicate glass fiber coated with fluorocarbon (TFE)
    Diameter25 - 142 mm and 8 x 10 in.12 - 142 mm and 8 x 10 in.25 - 100 mm and 8 x 10 in.
    Typical Thickness432 µm (17 mils)178 µm (7 mils)203 µm (8 mils)
    Typical Filter Weight5.8 mg/cm25.0 mg/cm23.4 mg/cm2
    Typical Water Flow Rate
    0.35 bar (35 kPa, 5 psi)
    220 mL/min/cm232 mL/min/cm2220 mL/min/cm2
    Typical Air Flow Rate
    0.7 bar (70 kPa, 10 psi)
    73 L/min/cm268 L/min/cm2180 L/min/cm2
    Maximum Operating Temperature - Air1093 ºC
    (2000 ºF)
    260 ºC
    (500 ºF)
    315.5 ºC
    (600 ºF)
    Typical Aerosol Retention**99.90%99.95%96.40%
    pH in Boiled Water Extract6.5 - 7.5--
     

     

    * The TX40HI45 and TX40HI75 are made from the same materials but were developed in conjunction with the U.S. EPA (Method 26) when a need arose to sample the exhaust gases from the stacks at incinerator facilities. These two grades are made with higher levels of the PTFE binder resin than the TX40HI20WW to withstand the corrosive atmosphere. The TX40HI75 has a higher level of binder than the TX40HI45 and both have a higher level than the TX40HI20WW.

    上海力敏實業有限公司代理pall產品,咨詢和訂購


    留言框

    • 產品:

    • 您的單位:

    • 您的姓名:

    • 聯系電話:

    • 常用郵箱:

    • 省份:

    • 詳細地址:

    • 補充說明:

    • 驗證碼:

      請輸入計算結果(填寫阿拉伯數字),如:三加四=7